Page
8
of
9
SmartPIN B100 User Manual
Operation current: <100mA
6.5
Output Connections
The RS-232 Output should comply with the standard RS-232 Pin-out as listed below:
Pin number RS-232
6.6
Operation LED
The Op-LED is a surface mount, tri-color, LED, which is visible from the back of the
SmartPIN B100 housing (using a light pipe). It is molded into the housing. The LED
provides operating information for the SmartPIN B100. It is a selling feature to the
integrators for easy maintenance and troubleshooting indications. The following chart gives
operation status meanings. The blink rate is about 2 times per second with an LED on
period about 0.25 second. The host should have the option of turning off the indicator.
LED State
Operating Condition
Off
No power
Steady Green
Powered on, with keys injected, communication
established
Blinking Green
Powered on, with Keys injected, no communication
Steady Yellow
Powered on, no keys, communication established
Blinking Yellow
Powered on, no keys, no communication established
Steady Red
Powered on & SmartPIN B100 is not functional
Blinking Red
Powered on, Tampering detected, keys erased