11
Chapter 3
Sending Direct Commands
The main purpose of IDTech .dll for Kiosk III/IV is to expedite integration to the device by providing the connectivity
and communication protocols. It also provides the main functions to get device info, perform Tap transactions, and
to modify terminal configuration data files.
The Kiosk III/IV has an extensive and powerful command set based on the NEO platform. A NEO command
consists of a Command, a Sub Command, and optionally data. To access these commands, please reference
the NEO/IDG Command document included as a separate item in the SDK. Please note that Protocol 1 com-
mands have been deprecated, and any existing Protocol 1 commands relevant to Kiosk III/IV can be accomplished
by a Protocol 2 command. The library uses the following the command to send Protocol 2 commands to Kiosk III/IV:
IDTechSDK::IDT_KioskIII::device_sendVivoCommandP2()
Any function not supported by the SDK can be sent with the sendIDGCommand.
IDTech Windows SDK Guide for Kiosk III/IV #80136501-001