Copyright 2019 ID TECH. All rights reserved.
Document Number: 80145503-001
Page 31 of 32
1.
Enable the 5C configuration of Terminal Capabilities by issuing the
72 53 01 28 01 35
command. (For more about terminal configurations, see Appendix H.)
2.
Use the Save Terminal Configuration command in the Universal Demo to set the values of
minor-config terminal TLVs as desired, making sure 5C is enabled. (See arrows in the screen
shot below.)
3.
Set the CA Public Key if it has never been set, and load any AIDs or do any other initializations
you wish to do, before proceeding.
4.
Set the device to Quick Chip and M/Chip Fast Mode by issuing the following command:
72
53 01 29 01 31
.
5.
Finally, change the device's USB mode to USB-KB by issuing the following command:
78 53
01 10 02 02 00
.
14.
Faster EMV (Quick Chip) Data
The output from a Quick Chip and M/Chip Fast transaction consists predominantly of standard EMV
tag data, since Quick Chip and M/Chip Fast is, in fact, just EMV. However, you might also encounter
certain ID TECH proprietary tags (as follows):
Tag
Meaning
DFEF5A
Terminal Data Setting - Tags to Return
DFEF5B
Mask for Tag5A
DFEF5C
Mask for Tag56
