User Manual for the SDAH01 Evaluation Kit for the HS3001 Humidity and Temperature Sensor
© 2017 Integrated Device Technology, Inc.
7
November 16, 2017
2.4
Data Logging Settings
To change the data logging measurement interval, select Data Logging from the Tools menu, and then click on Change Interval. Enter the
desired measurement interval, and click OK.
The data logging resolution can be selected in the same fashion as described in section 2.1.
Data logging settings can only be changed when no measurements are being taken.
2.5
Using the Plotter
The plotter
9
displays the measured relative humidity and temperature data simultaneously versus time (see Figure 2).
Hold the left mouse button, and drag it around an area to zoom onto that area.
Hold the middle mouse or scroll button, and drag to pan across the plot area.
To undo a zoom or pan operation, right click on the plot area, and select Un-Zoom (Un-Pan).
The plot area can always be reset to the default view by right clicking on the plot area and selecting Undo All Zoom/Pan.
To display the measurement points on the plotted curves, right click on the plot area and select Show Data Points. While moving the
application window, measurements points will not be plotted.
2.6
Valid Settings Ranges
Measurement settings can be selected within the following ranges:
Measurement interval: 0.5 to 3600 s.
Number of measurements: 1 to unlimited.
Data logging interval: 1 to 250 s.
Measurement resolution: 8, 10, 12, 14 bits.
3.
Ordering Information
Orderable Part Number
Description
SDAH01
SDAH01 Evaluation Kit, including SDAH01 Evaluation Board, HS3001 sensor modules, sensor module
extension cable, USB key with IDT Demo Software, USB cable, Quick Start Guide, User Manual for the
SDAH01 Evaluation Kit
