User Manual
Page 3
ID station User Manual
1. Set up your system
fastID comes in one box, containing:
1.
fastID printer
2.
brown carton box containing the tablet, cables and accessories
3.
Camfi controller [
only if ordered
]
The Camfi controller is an optional accessory. So you need to order it separately
along with the new fastID system. A Camfi controller is a WiFi device that you
connect to your camera. It will transfer any image you take automatically to the
fastID.
There are several ways of taking pictures and loading these pictures into the
system. Camfi is just one of them. Other ways are for example the “Read Card”
mode where you just take out the card from your camera and insert it into the
card reader which is part of your fastID system. The photos you took will be
shown on screen automatically.
Setting up your fastID system is quite easy. Unpack everything from the carton
box and follow these simple steps: If you prefer a video then follow this link to
our YouTube channel:
https://www.youtube.com/watch?v=bftpIMKtzRQ
Now switch ON the tablet and follow the Getting Started Wizard. This wizard will
guide you through the necessary steps of setting up the printer and setting up a
way of taking pictures and loading them into the system.
Step 1
: Take the printer, connect it to a power outlet and switch it ON
Step 2
: Load paper and ribbon according to the instructions (appendix A)
Step 3
: Put the tablet on top of the printer and connect it to a power outlet
Step 4
: Use the USB cable to connect the printer to the ID console
Step 5
: Insert the Card reader in an USB port on the right side of the ID console