IDS X Series, User Manual, Page: 20 / 32

Section: 8
IDS X-series LCD Keypad User Manual 700-411-01D Issued August 2010
20
5. The LCD display reads „User Code + *‟.
6. Enter the [USER CODE] followed by the [*] key.
7. The LCD display reads „Output No. + *‟.
8. Enter the [OUTPUT No] followed by the [*] key.
9. The LCD display reads „ *‟.
10. Enter the [OUTPUT ACTION] followed by the [*] key.
11. Repeat steps 6 - 10 until all the user outputs have been entered.
12. Press the [#] key to exit the User Program Mode.
Table 3: Output Address Physical Mapping Data
Address Physical Outputs Address Physical Outputs
00 Disabled 21 Reserved
01 Onboard output 1 22 Reserved
02 Onboard output 2 23 Reserved
03 Onboard output 3 24 Reserved
04 Onboard output 4 25 Reserved
05 Onboard output 5 26 Reserved
06 Zone expander 1 output 1 27 Reserved
07 Zone expander 1 output 2 28 Reserved
08 Zone expander 2 output 1 29 Reserved
09 Zone expander 2 output 2 30 Reserved
10 Zone expander 3 output 1 31 Reserved
11 Zone expander 3 output 2 32 Reserved
12 Zone expander 4 output 1 33 Reserved
13 Zone expander 4 output 2 34 Keypad 1 output
14 Zone expander 5 output 1 35 Keypad 2 output
15 Zone expander 5 output 2 36 Keypad 3 output
16 Zone expander 6 output 1 37 Keypad 4 output
17 Zone expander 6 output 2 38 Keypad 5 output
18 Reserved 39 Keypad 6 output
19 Reserved 40 Keypad 7 output
20 Reserved 41 Keypad 8 output
Table 4: Output Actions Data
Value Output Action
00 Set Output High (Set)
01 Set Output Low (Reset)
02 Pulse Output High
03 Pulse Output Low
8.3.10 Option 14 – User Reporting Codes Enable
[MASTER CODE] [*] [1] [4] [*] [USER CODE] [*] [BITMAP] [*] [#]
1. Enter the User Program Mode as per steps 1 - 4 of section 8.2.
2. The LCD display reads „Option Menu‟, „Add User Code‟.
3. To select menu option 14 – „User RC Enable‟, press the [1] [4] keys or alternatively use the
[PANIC] or [MED] keys to scroll through the list of programmable options until you reach the
option you want.