IDS VX PRO Series, Product User Manual

Page: 57 / 66

11 13
15 17
11 13
15 19
33 28
28 23
43 42
40 38
37 35
32 30
Without Nominal Distance With Nominal Distance 5mm
Distance in Air Distance in Air
Remove
Approach
Remove
Approach
Remove
Approach
Remove
Approach
Remove
Approach
Event
X+
X-
Y
Z+
Z-
Axes of
Opera�on
Sensi�vity Suggested scenarios
High Concrete
Normal Wood
Low Window
II. Shock test III. Tilt test
You can set the �lt angle
(5° to 25°) in the mobile client so�ware.
Note: The �lt detec�on is only applicable
to horizontal or ver�cal scenes. The �lt
angle is perpendicular to the geocentric
direc�on as the reference standard.
Detec�on gap According to the magnet detec�on performance table
External inputs 2
Shock detec�on Yes
Tilt detec�on Up to 25°
LED indicator Green (MC), Orange (�lt), Red (shock), Blue (alarm)
Opera�ng temperature
-10 °C to 55 °C (14 °F to 131 °F)
Storage temperature -20 °C to 60 °C (-4 °F to 140 °F)
Opera�ng humidity 10% to 90%
Dimension (H × W × D)
Sensor: 22.5 mm × 103 mm × 23.2 mm
Magnet: 13 mm × 34.4 mm × 11.4 mm
Weight 60 g
Transmission frequency 868 MHz
RF range 800m
Ba�ery CR123A × 1 (included)
Standard ba�ery life 3 years
1. Magnet 2. Posi�oning line 3. LED Indicator 4. Tamper bu�on
5. Power switch 6. External input 6. Ba�ery 8. Shock sensor
Check if the installa�on posi�on is properly.
I. Magnet test
Description
Product code : 868-06-005
Helpdesk : +27 (0) 87 159 7341
Test
3
I. Check signal strength and align the posi�oning line.
II. Install the detector.
a. With screw. b. With double sided tape.
(Op�onal) route the cable through cable hole if external
inputs required.
Note: Installa�on with double sided tape is not recommended if shock
detec�on enabled.
Installation
4 1
2
Enrollment
Wireless door contact and
shock detector
Specification
EN 50131-1:2006+A1:2009+A2:2017
EN50131-2-8:2016
EN 50131-2-6:2008
EN 50131-5-3:2017
Security Grade(SG)2 Environmental
Class(EC) II
Cer�fied by Telefica�on
VX PRO VX PRO