IDS VX PRO Series, Product User Manual

Page: 14 / 66

RF Frequency 868 MHz
Modulation 2GFSK
Method Two-way communication
RF Range 800m
Input 1 Alarm, 1 Tamper
PGM 1, AM/Output
3.3 V output 1, up to 10 mA
Power switch 1
Series port 1
LED Status
3: Alarm/ tamper (Red), fault (Amber),
signal strength (Green/Red)
Power supply 3 CR123, 3 V
Power output 3.21 V to 3.35 V, Rated: 3.3 V
Consumption
Max. current: 47.85 mA,
Quiescent current: 40.29 uA
Voltage: 3 VDC
Operation temperature –10 to 55
Operation humidity 10% to 90%
Dimension (W x H x D) 102 x 41 x 20 mm
Weight 35 g (without battery), 90 g(with battery)
Installation Put inside wireless weady detector
Product code : 868-03-015
Helpdesk : +27 (0) 87 159 7341
Wireless universal transmitter
This transmi�er allows third-party wired detectors to
connect to the VX PRO intrusion alarm system.
It supports tampering alarm and can supply power to the
connected peripherals.
1. Bu�on ac�vated 2. Alarm received
Overview
Replace battery
3
1
Description
2
2
Test
Specification
Note: If the device has no response when power on, connect the two
terminals of zone input and power the device on again
VX PRO VX PRO