IDS Digital Remote Receiver MKII 700-373-02C Issued April 2010
11
Set
DIP switches 1
and
2 for the corresponding relays to pulse or clear switches 1
and
2 to toggle.
Clear
8 to save settings.
THE ARMED and READY LED’s flash.
Clear
other switches to return to standby.
The ARMED LED is on.
6.3
Assign Panic Relay
A panic relay will be triggered by a panic remote - or by holding down any button on a learned remote for
3 seconds (if this feature is enabled).
Set
DIP switches 6 then 7.
The ARMED LED is on, whilst the READY LED flashes.
Set
DIP switch 1
OR
2 to select which relay to activate when a Panic Event occurs.
Clear
DIP switch 8 to commit panic relay choice to memory.
The ARMED and READY LED’s will flash.
Clear
other switches to return to standby mode.
The ARMED LED is on.
6.4
Assign Relay Button
Changing the button that triggers a relay will affect the remote used to change
it as well as any
remotes that are subsequently learned
.
The remotes that have already been learned will keep their
previous button to relay settings. (When pressing a button to assign to a relay the keypad gives two
beeps to indicate the change).
Set
DIP switch 5, then 8.
The READY LED is on, whilst the ARMED LED flashes.
Set
either DIP switch 1 or 2 to select the desired relay.
Press
the button on the remote that is required to activate the relay.
Any button (on that remote) that was previously programmed to activate that relay will no longer do so.
Repeat
for the other relay if so required.
Clear
8 to save this setting.
The ARMED and READY LED’s will flash.
Clear
other switches to return to standby mode.
The ARMED LED is on.
6.5
Relay Secure/Safe Mode
(Default is Secure for both relays)
Secure Mode: Loss of supply power will
not
switch the state of the relay – (Normally relaxed).
Safe Mode: Loss of supply power
will
cause the relay to switch state – (Normally activated). When the
relays are set to Safe Mode, the relay terminal contact N/O and N/C will be switched around.
Set
DIP switch 6, then 8.
The ARMED LED will flash, whilst the READY LED flashes fast.
Use
DIP switches 1 and 2 to select which relays to set for safe mode.
Clear
DIP switch 8.
Clear
DIP switch 6.
The ARMED and READY LED’s will flash.
Summary of Contents for MKII
