Owner’s Manual
700-624-01C
15
If four incorrect user codes are entered consecutively while either arming or
disarming the system, the keypad will be non-responsive for 30 seconds. Your
monitoring company will also be notified on a keypad tamper.
NOTE:
1.
If the ARMED indicator is flashing upon entry, there has been a violation. The
intruder may still be inside! Call for assistance.
2.
If a strobe (or flashing light) has been installed and an alarm condition is registered,
the light will continue flashing until a valid
[USER CODE] is entered.
To Disarm with a Remote Control
1.
Press the arm/disarm remote button.
3.
The system will disarm and the arm/disarm indicator (if installed) will turn off.
4.
If programmed to do so, the siren will sound briefly - verify with your installer.
Emergency Situations
Fire Alarm
Hold down the key until the beep
If the [F] key is pressed until the keypad beeps (approximately 1 second) a FIRE
ALARM condition will be activated.
The FIRE ALARM CONDITION can also be triggered by a smoke detector connected
to an appropriately programmed zone.
The siren will sound (1 second on, 1 second off) and the FIRE REPORTING CODE
will be transmitted to the monitoring company.
To silence the siren enter a 4 digit [USER CODE]. The siren will stop sounding after
10 minutes if no user code is entered.
Panic Alarm
Hold down the key until the beep
If the [P] key is pressed until the keypad beeps (approximately 1 second) a PANIC
ALARM condition will be activated.
Any FIXED PANIC or REMOTE PANIC buttons which may have been installed can
also activate a PANIC ALARM.
If audible panic option has been selected, the siren will sound. A PANIC
REPORTING CODE will be transmitted to the monitoring company.
To silence the siren, enter a valid 4 digit [USER CODE]. If the siren is not cancelled,
it will stop automatically after the programmed SIREN TIME OUT period.
Ensure that your installer has enabled this function if it is required.
Press this key only in an emergency situation that requires response by
emergency personne
l.
Summary of Contents for IDS806
Page 29: ...Owner s Manual 700 624 01C 29...
Page 30: ...Owner s Manual 700 624 01C 30...
Page 31: ...Owner s Manual 700 624 01C 31...