Mod: MDM/011/M4 Rev 2
IDS GeoRadar
User Guide
QGG/2020/002
Rev. 1.1
4.3
Survey Unit installation and setup
In case the installation is on a pole, ensure that the pole is properly weighted on the base or coupled with a
concrete base 50x50X20cm.
1.
Mount the plate on the articulated bracket using T-30 Torx® key
.
2.
Mount the bracket with the plate on the pole, fixing with the metallic ties, using 7 mm socket wrench, with
the tie screw facing the outward side of the pole and placed on the pole as much as close to the bracket.
3.
Take the
Survey
Unit and put it gently on the bracket, screwing it to the metallic bracket; eventually direct
the SU to the desired azimuth and tilt angles using the graduated knobs.
1
2
3
