Quantis Appliance User Manual
Document version : 2.13
Distribution : Confidential
Date : 06.08.2020
Page: 15 / 47
WIRED-PROPERTIES.CARRIER: on
IP4.ADDRESS[1]: 10.17.17.10/8
IP4.GATEWAY: 10.0.0.1
IP4.DNS[1]: 10.0.0.1
IP6.ADDRESS[1]: fe80::ec4:7aff:fe95:88ac/64
IP6.GATEWAY:
********************
GENERAL.DEVICE: eno2
GENERAL.TYPE: ethernet
GENERAL.HWADDR: 0C:C4:7A:95:88:AD
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.CONNECTION: System eno2
GENERAL.CON-PATH:
/org/freedesktop/NetworkManager/ActiveConnection/11
WIRED-PROPERTIES.CARRIER: off
IP4.ADDRESS[1]: 10.17.17.101/8
IP4.GATEWAY: 10.0.0.1
IP4.DNS[1]: 10.0.0.1
IP6.ADDRESS[1]: fe80::ec4:7aff:fe95:88ad/64
IP6.GATEWAY:
********************
Warning:
although the IP addresses have been setup on the same subnet in this example, this should
not be done on a production LAN. The Quantis Appliance has two ethernet ports, if both are to be used,
then the first ethernet port should be on a different subnet from the second ethernet port. It is
important to do this because this gives the user assurance of the route that traffic takes through the
network hardware, which otherwise could be inconsistent.
3.2.4
Setup hostname
The factory default hostname is
qa2-proto1.localdomain
To change the hostname, type:
qa-cli>
hostname
–
-name myhostname
Hostname correctly changed to 'myhostname'
