background image

IDOL Manual

 

Thank you for purchasing the American Weigh IDOL 

digital pocket scale. Please read all operating instructions 

carefully before use. Scales are precision measuring devices 

and should always be handled with proper care. To ensure 

years of reliable service, keep these simple tips in mind:
• 

Do not exceed the scale’s maximum capacity. This 

scale has integrated overload protection, but any 

overload protection has its limits!

• 

Avoid exposure to extreme heat or cold. Scales 

perform best at normal room temperature. If 

temperatures have changed dramatically, recalibration 

may be necessary.

• 

Allow your scale to warm up for 30-60 seconds before 

performing calibration (if available).

• 

Store your scale in a clean, dry location. Dust, dirt, 

and moisture can accumulate on the weighing 

sensors and electronics causing inaccuracy or 

malfunction.

• 

Avoid using your scale in close proximity to strong 

radio wave emitting devices such as cordless phones.

• 

Always weigh on a flat and level surface, free from 

vibrations and drafts. The corner of a room is usually 

the most stable.

• 

Gently apply all items to be weighed. Do not drop 

items onto the weighing platform.

• 

Avoid dropping your scale. The warranty does not 

cover damage due to rough treatment or overload.

• 

Check the batteries first if you are having any trouble 

with your scale. This simple step can remedy most 

scale issues.

• 

Calibration should be checked and adjusted 

occasionally as part of routine scale maintenance.

- English

Summary of Contents for IDOL-100





















Reviews: