IDOL Manual
Modèle
Tolérance
acceptable (±)
Poids de
calibrage
Classe de
précision
recommandée
IDOL-100
0.02g
100g
OIML M2
IDOL-1KG
0.2g
500g
OIML M2
XX. Adjustment
1. Press and hold the
MODE
key until the display shows “CAL”
2. Make sure nothing is on the scale platform then press the
MODE
key again.
3. The display will flash “CAL” followed by the required calibration
weight (see chart above).
4. Place the required calibration weight on the platform. The
display will flash “PASS” then return to normal weighing mode.
Adjustment is complete!
XXI.
Troubleshooting
•
Problem:
Scale will not turn on
•
Solution:
Check the batteries and battery contacts.
•
Problem:
Displayed weight fluctuates randomly
•
Solution:
Make sure your workspace is stable and free of
any air currents or vibration. In some cases, nearby radio wave
emitting devices can cause fluctuations.
•
Problem:
Displayed weight is inaccurate
•
Solution:
Perform a calibration adjustment. If you are still
having trouble, contact our warranty
department.
XXII. Error Codes
1. OUTZ
- Zero point has drifted out of the acceptable
range. Try to perform a calibration adjustment. If the
problem persists, the load cell may be permanently
-
Français
