SWC-2000 Command Guide
11
3
Command
3.1 Summary
A command consists of “@” (“40” in hexadecimal), 3 one-byte alphabetical characters (upper and lower
cases), followed by parameters (one-byte numbers). For some commands, multiple parameter values can be
specified or parameters are not necessary. Processing is executed by sending a delimiter at the end of the
command.
Example: @EXC,1,2,3
“,” (a comma, “2C” in hex) is indicated between a command and parameter and between two parameters.
“
” is indicated as a delimiter CR LF (line feed, “0D” and “0A” in hex).
■
If there is an error:
An error command is returned if an undefined command or wrong parameter is included.
Example: @SPS,2
@ERR,1
■
Using as HELP
If only delimiter is sent, command list as the help command is returned.
Example:
--------------- HELP (1/4) ---------------
(POWER BUTTON Command)
@GPS / SPS: Getting/Setting the standby button