OPF-TH2000/OPF-RH2000 User
’s Guide
18
OFF:
Transmits the detection when the Hot Plug Detect signals of the sink
device continue to change for 0.1 second or longer.
ON : Transmits the detection when the Hot Plug Detect signals of the sink
device continue to change for 1 second or longer (for 0.9 second or
shorter, it is not transmitted).
4
Sets the clock speed of the Display. Data Channel (15 pin HDMI connector) signals.
OFF:
Signals are output at 100 KHz from the receiver.
ON : Signals are output at 75KHz from the receiver.
5.3.2 Setting input equalizer (only transmitter)
The HDMI signal input part has manual compensation circuit. Signal deterioration caused by cables can be
minimized by setting the amount of equalization according to the connected cable.
Default: 8
Setting input equalizer
Switch
Equalizer
0
Minimum
〜
8
(Default)
〜
F
Maximum
