NJR-T01SDI Command Guide
34
@GES
Monitor EDID
Command group
Group A
Function
Getting
Format
@GES, device, ch, port, mode
Return value
@GES, device, ch, port, mode, status_1 (, status_2, status_3, status_4)
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJAR
Configurator through LAN, the value is “1” (fixed).
port: Output connector
“2” fixed.
mode: Status to be gotten Getting
0 = All of 1 to 4
1 = Monitor name
*1
2 = Resolution and dot clock
*2
3 = HDMI support status, sampling structure, and color depth
*3,
4 = Audio support status, sampling frequency, bit length, the number of channels,
and compressed audio support status
*4
status_1 to status_4: Status
*1 For monitor name:
Reply example
Description
MSD-6208
A sink device named “MSD-6208” is connected.
UNCONNECTED
No sink device is connected.
*2 For resolution and dot clock:
Reply example
Description
1920x1080
148.50MHz
A sink device supporting 1920x1080 (resolution) and
148.50 MHz (dot clock) is connected.
*3 For HDMI support status, sampling frequency, and color depth:
Reply example
Description
DVI
A sink device that does not support HDMI signal is
connected.
HDMI-
RGB/YCbCr422/
YCbCr444-24/30BIT
COLOR
A sink device supporting HDMI signal is connected.
Supported sampling structure (RGB, YCbCr 4:2:2,
YCbCr 4:4:4, YCbCr4:2:0) and color depth (24, 30, 36)
are returned.
