NJR-T01SDI Command Guide
18
4.5.2 Basic settings
4.5.2.1 Output settings
@GDM / @SDM
Output mode
Command group
Group A
Function
Getting
Setting
Format
@GDM, device, ch, reserved
@SDM, device, ch, port, mode
Return value
@GDM, device, ch, reserved, mode_1,
mode_2
@SDM, device, ch, port, mode
Parameter
device: Model
“1” (fixed).
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJAR
Configurator through LAN, the value is “1” (fixed).
reserved: Reservation
“1” (fixed).
port: Output connector
0 = All outputs, 1 = Output connector for extension, 2 = HDMI output connector
mode_1 : Output mode of output connector for extension
mode_2 : Output mode of HDMI output connector
mode
: Output mode
0 = AUTO [Default], 1 = DVI output, 2 = RGB output, 3 = YCbCr 4:2:2 output,
4 = YCbCr 4:4:4 output
Example
@GDM,1,1,1
@GDM,1,1,1,0,4
Getting the output mode of channel 1.
Output connector for extension : AUTO,
HDMI output connector
: YCbCr 4:4:4 output
@SDM,1,1,2,4
@SDM,1,1,2,4
Setting the output mode of channel 1 HDMI output
connector to “YCbCr 4:4:4”.
Completed normally.
Remarks
If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch to
Group A.
