IDK MSD-72 Series, User Manual

Page: 111 / 150

MSD-72 Series User’s Guide
111
9.13 Preset memory
9.13.1 Loading cross pooint
Menu Top
→
PRESET MEMORY
→
LOAD CROSS POINT
Setting value No.1 to No.9
You can load the I/O channel settings of video and audio saved in the cross point memory.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
【
See:
：
9.13.2 Saving cross point
】
Note:
Functions of control command execution keys (COMMAND A to COMMAND I) changes and the UNLOCK
key LED shows each status as follows.
・
UNLOCK key lights: Registered control commands are executed.
・
UNLOCK key blinks: Registered cross point memories are loaded.
・
UNLOCK key does not light: The control command execution keys are locked.
9.13.2 Saving cross point
Menu Top
→
PRESET MEMORY
→
SAVE CROSS POINT
Setting value No.1 to No.9
You can save the I/O channel settings of video and audio into the cross point memory.
Up to nine cross point memories can be saved with their name (up to 10 characters). If you set “---” (not
control) for “ 9.13.3 Editing cross point ”, a writing method (CONTINUE or DELETE) can be selected.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
■
Writing method
“CONTINUE”: “---” (not control) will be kept in the cross point memory.
“DELETE”: the current input channel settings will be overwritten.
OUT1 = Input channel 1
OUT2 = Input channel 2
Current input channel setting
OUT1 = Input channel 3
OUT2 =
Not control
Current cross point memory1
“
---
“
(not control) will be kept.
OUT1 = Input channel1
OUT2 =
Not control
”
CONTINUE
”
[Default]
OUT1 = Input channel1
OUT2 = Input channel2
”
DELETE
”
Input channel settings will be
overwritten.
[Figure 9.26] Saving cross point