MSD-72 Series User’s Guide
112
9.13.3 Editing cross point
Menu Top
→
PRESET MEMORY
→
EDIT CROSS POINT
Setting for Each cross point memory
Setting value [Table 9.28] Editing items of cross point
[Table 9.28] Editing items of cross point
Setting item
Setting value
Default
Output channel (OUT)
1 to 4
-*
Video input channel (V)
--- (Not control), 1 to 9, OFF
---
Audio input channel (A)
--- (Not control), 1 to 9, OFF
---
Memory name (NAME)
20 to 7D of ASCII code
20 (space)
*Setting input channels of video and audio for each output channel
You can edit settings of the cross point memory.
First, select the memory number and press the MENU/SET key, and then edit settings.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
■
Not controlling channel
If you select “---” when setting input channel of V or A, channels are not controlled.
Outputs that are set not to be controlled are not switched when cross point memory is loaded.
OUT1 = Input channel1
OUT2 = Input channel2
Current input setting
OUT1 = Input channel3
OUT2 = Not control (---)
Current setting of cross point memory1
Loading
OUT1 = Input channel3
OUT2 = Input channel2
Input setting after loading cross point memory
Setting is not changed.
[Figure 9.27] Loading edited cross point memory