IDK HDC-UHD Series, User Manual

Page: 46 / 104

HDC-UHD Series User Guide
46
■
Maintenance menus
Set necessary items for checking operation.
The maintenance menus are not displayed by default. To display the menus, change the setting of
“
9.6.4 Displaying/Hiding menu ”.
[Table 9.3] Maintenance menu
Menu number Function Target channel Page
C01 to C02 HDCP input enabled/disabled IN1/IN2 68
C03 to C04 No-signal input monitoring IN1/IN2 69
C05 HDBaseT input long reach mode IN2 70
C10 to C14 Hot plug ignoring duration OUT1 to OUT5 71
C20 to C24 Sink device EDID check OUT1 to OUT5 72
C30 to C34 Output format OUT1 to OUT5 73
C40 Downconversion output
－
74
C45 to C48 HDBaseT output long reach mode OUT2 to OUT5 74
C60
Ignoring duration after automatic switching
－
50
C70 to C73 RS-232C communication
－
75
C74
RS-232C operation mode
－
76
C75 to C78
RS-232C sending channel
－
77
C79 to C7B
RS-232C receiving channel
－
78
C80 to C83 IP address
－
79
C84 Subnet mask
－
80
C85 TCP port number
－
81
C86 MAC address
－
82
C87 to C88 Setting HDBaseT LAN
－
82
C90
Alarm
－
66
■
Status indication menus
Display input status, connection status of sink devices, and the HDC’s status.
The Status indication menus are not displayed by default. To display the menus, change the setting of
“9.6.4 Displaying/Hiding menu”.
[Table 9.4] Status indication menu
Menu number Function Page
L01 to L30 Viewing input information 83
L40 to LL4 Viewing output information 87
H00 to H02 Viewing system status 91