HDC-TH100WPJ User Guide
15
MSD-802UHD
HDC-TH100WPJ
[Fig. 6.2] Powered from MSD-802UHD
■
From DC 12 V power supply:
Insert a non-energized power cable into the terminal block. Remove the left wallplate cover and connect the
terminal block to the DC 12V IN connector.
AWG28 to AWG16 conductor gauge is recommended. The recommended wire strip length is 0.28 in. (7 mm).
＋
－
Up to 0.28 in. (7 mm)
＋
－
Power cable
Terminal block
[Fig. 6.3] Connecting DC 12 V power cable
Note:
Ensure the polarity is correct
when inserting the power cable to the terminal block. Otherwise, it may cause
problems or a fire.
