IDK HDC-S200, User Manual

Page: 45 / 64

HDC-S400/200 Users Guide
45
8.20 [ F76] Selecting EDID for WXGA
You can set the number of WXGA pixels based on the resolution setting of EDID.
on: 1366×768
oFF: 1360×768 [Default]
Note: This is enabled only if one of 03 to 22 is selected for resolution setting of EDID.
[Table 8.6] EDID value which is able to enable WXGA
Set value Resolution Pixels Standard Remarks
3 1080p (59.94 / 60) 1920×1080 HDTV
[Default]
6 1080p (24 / 25 / 30 / 50
）
1920×1080 HDTV
14 WXGA
1360×768
1366×768
VESA
15 SXGA+ 1400×1050 VESA
16 WXGA+ 1440×900 VESA
17 WXGA++ 1600×900 VESA (Reduced Blanking)
18 UXGA 1600×1200 VESA
19 WSXGA+ 1680×1050 VESA
20 VESA1080 1920×1080 CVT
(For DVI input device)
(Reduced Blanking)
・
Setting by menu
Normal condition (OFF)
↓ SET key
“
－
” “
＋
” key set INPUT
EDID WXGA → select F76
↓ SET key
“
－
” “
＋
” key select pixels [Default: 1360×768]
OFF:1360×768 ON:1366×768
↓
During EDID WXGA setting is processing, READY LED is OFF. After setting is finished, the
LED is ON
↓
After processing, 7-SEGMENT LED goes back to menu.