HDC-RH401/201/101 Users Guide
61
Color depth
24 bit, 30 bit, 36 bit Deep Color
Audio
Digital
Number
1 output
2 outputs
4 outputs
Signal
Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level: -20 dBFS
- Max. output level: 0 dBFS
Connector
1 female HDMI Type A
(*5)
2 female HDMI Type A
(*5)
4 female HDMI Type A
(*5)
Daisy Chain
Number / Signal
1 output / Multi-channel linear PCM up to 8 channels
- Sampling frequency: 32 kHz to 192 kHz
- Sample bit: 16 bit to 24 bit
- Reference level: -20 dBFS
- Max. output level: 0 dBFS
Connector
1 RJ-45 (*3)
Function
Others
Daisy chain connection
Seven segment LED signal status check
Anti-Snow (*7)
Connection Reset (only HDMI output) (*8)
RS-232C (pass through)
Plug & Play
DDC2B is supported
Twisted pair cables
Cat5e UTP / STP, Cat6 UTP / STP, CAT.5E HDC cable (*4)
Max. extension distance
197 ft. approx. / 60 m (*6)
Control
Serial control port
Number / Signal
1 port / RS-232C, pass through 115.2 kbps
Connector
1 RJ-45 (*3)
Others
AC adapter
90 - 250 VAC ± 50 Hz / 60 Hz ± 3 Hz
Power consumption
About 13 Watts
About 16 Watts
About 19 Watts
Dimensions
8.27 x 1.73 x 11.81 / 210 (W) x 44 (H) x 300 (D) mm
(EIA 1/2U size, projections are not included)
Weight
4.19 lbs. / 1.9 kg
4.19 lbs. / 1.9 kg
4.41 lbs. / 2.0 kg
Temperature
Operating: 32°F to 104°F / 0°C to +40°C
Storage: -4°F to +176°F / -20°C to +80°C
Humidity
Operating/ Storage humidity: 20% to 90% (Non Condensing)
*1
xvYCC, 3D, ARC and HEC are not supported.
*2
HDCP-compliant DVI signals are not supported. To transmit these signals, use our extender which supports DVI signals or MSD-402 as receivers.
*3
RJ-45 (HDBaseT input/output connectors) is only for Cat5e/Cat6 twisted pair cable. Please do not use it for LAN devices or the like.
*4
T568A or T568B straight connection. HDC.CAT5E cable is HDBaseT recommended cable which IDK developed.
*5
Please use HDMI cable which is shorter than 5 m / 16.4 ft. approx.
*6
If connected to a device whose status is significantly bad, video signal can be unstable or cannot be output. Check the operation beforehand or contact us.
*7
The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow
noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
*8
For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the
Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were
physically disconnected and reconnected. This feature only works for the HDC’s output. If other devices are connected between the HDC’s output and sink device, this feature
may be invalid.
