IDK FDX-08, Command Reference Manual

Page: 17 / 79

FDX-08 Command Guide
17
4.2 Command list
Error status
Command Function Page
@ERR Error status 20
I/O channel selection
Command Function Page
@GVA / @IOS Switching I/O channels of FDX and MAU-1616 (optional) simultaneously 21
@GCP / @IOV Switching only FDX I/O channels 21
@GCA / @IOA Switching only MAU-1616 I/O channels 22
@SSC Straight Switching* I/O channel of FDX and MAU-1616 22
@SSV Straight Switching* I/O channel of FDX 22
@SSA Straight Switching* I/O channel of MAU-1616 23
@GCY / @SCY Input channel selection copy 23
Input settings
Command Function Page
@GIQ / @SIQ Input equalizer 24
@GDT / @SDT No-signal-input monitoring 24
@GHE / @SHE HDCP input enabled/disabled 25
@GAG / @SAG SDI input audio group 26
@GDU / @SDU SDI Dual Stream input video 27
Input timing settings
Command Function Page
@GPI / @SPI Input video start position 28
@GSI / @SSI Input video active area 29
@GAP / @SAP Input video aspect ratio 30
@GIC / @SIC Input contrast 31
@GIB / @SIB Input brightness 32
@GGM / @SGM Input gamma 33
@GFL / @SFL Input sharpness 34
@GHU / @SHU Input HUE 35
@GSR / @SSR Input saturation 36
@GEF / @SEF Input video settings 37
Output settings
Command Function Page
@GEQ / @SEQ Output equalizer 40
@GDM / @SDM Output mode 40
@GHM / @SHM Sink device EDID check 41
@GMK / @SMK Hot plug ignoring duration 42
@GDC / @SDC Output Deep Color 42