FDX-08 Command Guide
26
@GAG / @SAG
SDI input audio group
Function
Getting
Setting
Format
@GAG
@SAG,in_1,primary_1,secondary_1
(,in_2,primary_2,secondary_2
･･･
)
Return value
@GAG,primary_1,secondary_1,
･･･
primary_8,secondary_8
@SAG,in_1,primary_1,secondary_1
(,in_2,primary_2,secondary_2
･･･
)
Parameter
in_1 to in_8: Input channel
0 = All inputs, 1 to 8 = INPUT1 Input 1 to INPUT8
primary_1 to primary_8: Primary audio of each input channel
1 = Audio group 1 (1ch to 4ch) [Default]
2 = Audio group 2 (5ch to 8ch)
3 = Audio group 3 (9ch to 12ch)
4 = Audio group 4 (13ch to 16ch)
-1 = SDI input board is not mounted.
secondary_1 to secondary_8: Secondary audio of each input channel
1 = Audio group 1 (1ch to 4ch)
2 = Audio group 2 (5ch to 8ch) [Default]
3 = Audio group 3 (9ch to 12ch)
4 = Audio group 4 (13ch to 16ch)
-1 = SDI input board is not mounted.
Example
@GAG
@GAG,1,2,1,2,1,2,1,2,1,2,-1,-1,-1,-1,-1,-1
Getting the SDI input audio group
Primary audio of input channel 1 to 5:
Audio group 1. Secondary audio: 2
SDI input board of input channel 6 to 8 is
not mounted.
@SAG,0,3,4
@SAG,0,3,4
Setting the primary audio of all input
channels to audio group 3, secondary
audio to audio group 4
Completed
Remarks
An audio group cannot be specified as both primary and secondary audio group.
Supported since firmware ver.3.xx
