FDX-08 Command Guide
33
@GGM / @SGM Input gamma
Function
Getting
Setting
Format
@GGM,in_ch
@SGM,in_ch, gamma
Return value
@GGM,in_ch,gamma
@SGM,in_ch, gamma
@GGM,in_ch,error
Parameter
in_ch: Input channel
1 to 8 = INPUT1 to INPUT8
gamma: Input gamma
10 = 1.0 [Default]
1 to 30 = 0.1 to 3.0
error:
- 1 = Input board is not mounted.
- 2 = Scan converter output board is not mounted.
- 3 = No video input
Example
@GGM,1
@GGM,1,10
Getting the input gamma of input
channel 1
1.0
@SGM,1,10
@SGM,1,10
Setting the input gamma of input
channel 1 to 1.0
Completed
Remarks
Supported since firmware ver.2.xx
