COS-100HD-B User
’s Guide
44
7.5 Receiver (Setting menu)
You can set receiver
’s input in normal use.
Tip:
“[ ]” shows each menu number in this section.
7.5.1 [ F01 ] Digital audio output
You can enable and disable digital audio output.
Setting values
on : ON [Default]
oFF : OFF
7.5.2 [ F02 ] Analog audio output
You can enable and disable analog audio output.
Setting values
on : ON [Default]
oFF : OFF
Note: If compressed audio (Dolby Digital, DTS and the like) is input, analog audio is not output.
7.5.3 [ F90 ] Displaying firmware version
You can display the firmware version.
7.5.4 [ F91 ] Displaying hardware version
You can display the hardware version.
7.5.5 [ F99 ] Maintenance / Status display menu
You can set how the maintenance menu and status display menu are displayed.
Setting value
oFF : Not displayed [Default]
on : Displayed (not displayed when the COS is turned on next time)
ALL : Always displayed (displayed when the COS is turned on next time as well)
