Idis TR-4516 Operation Manual Download

Page: 51 / 66

Searching Video

While in the search mode, pressing the

MENU

button

displays the following Search menu on the right edge of
the screen. Pressing the

MENU

button again hides the

menu. You can navigate through menus and items by
pressing the arrow buttons.

Search Menu

Search

Search by changing Event Log Search, Record Table
Search and Text-In Search.

Go to

•

Go to the First:

Displays the first recorded image.

•

Go to the Last:

Displays the last recorded image.

•

Go to the Date/Time:

Displays the Go to the Date/

Time screen.

Bookmarks

Add the current playback point to the bookmark list.

The maximum number of bookmarks that can be
saved is 64.

Display

Used to change the screen layout to single screen,
2x2, 1+5, 1+7, 3x3, 4x4.

•

OSD On/Off

: Enables/disables the OSD feature.

Previous/Next Group

Loads the previous/next screen group.

Alarm

Pressing this button while the alarm has been
activated resets all DVR alarm outputs, including the
built-in buzzer.

Panic Record

Use the Panic Record feature.

Part 3 - Search

Summary of Contents for TR-4516



































































Search results

Summary of Contents for TR-4516

Reviews:

Related manuals for TR-4516

Brands by name

Popular brands

Idis TR-4516, Operation Manual

Search results

Summary of Contents for TR-4516

Reviews:

Related manuals for TR-4516

Brands by name

Popular brands