background image

Before reading this manual

5

Copyright

© 2021 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this manual.
Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this manual are subject to change without prior notice.

Registered Trademarks

IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.

The information in this manual is believed to be accurate as of the date of publication even though explanations of some 
functions may not be included.  We are not responsible for any problems resulting from the use thereof.  The information 
contained herein is subject to change without notice.  Revisions or new editions to this publication may be issued to incorporate 
such changes.

The software included in this product contains some Open Sources. You may obtain the corresponding source code which we 
have to distribute according to the license policy. Go to System Setup - About page for more information. This product includes 
software developed by the University of California, Berkeley and its contributors, and software developed by the OpenSSL Project 
for use in the OpenSSL Toolkit (http://www.openssl.org/). Also, this product includes cryptographic software written by Eric 
Young ([email protected]), and software written by Tim Hudson ([email protected]).

Summary of Contents for TR-2508

























Reviews: