Idis TC-D4222RX, Installation Manual

Page: 3 / 12

Safety Precau�ons
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
1. Read Instruc�ons
All the safety and opera�ng instruc�ons should be read before the
appliance is operated.
2. Retain Instruc�ons
The safety and opera�ng instruc�ons should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp so� cloth for cleaning.
4. A�achments
Never add any a�achments and/or equipment without the approval of
the manufacturer as such addi�ons may result in the risk of fire, electric
shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not strong
enough to sustain the camera. The equipment may fall, causing serious
injury to a child or adult, and serious damage to the equipment. Wall or
shelf moun�ng should follow the manufacturer's instruc�ons, and
should use a moun�ng kit approved by the Manufacturer.
This equipment and cart combina�on should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combina�on to overturn.
Do not place this equipment in an enclosed space. Sufficient
ven�la�on is required to prevent an increase in ambient temperature
which can cause malfunc�on or the risk of fire.
7. Power Sources
This equipment should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power,
please consult your equipment dealer or local power company.
You may want to install a UPS (Uninterrup�ble Power Supply)
system for safe opera�on in order to prevent damage caused by an
unexpected power stoppage. Any ques�ons concerning UPS, consult
your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connec�ons before
handling the equipment.
9. Lightning
For added protec�on for this equipment during a lightning storm, or
when it is le� una�ended and unused for long periods of �me, unplug it
from the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the equipment due to lightning and power-line
surges. If thunder or lightning is common where the equipment is
installed, use a surge protec�on device.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
the risk of fire or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment
as they may touch dangerous voltage points or short out parts that
could result in a fire or electric shock. Never spill liquid of any kind on
the equipment.
12. Servicing
Do not a�empt to service this equipment yourself. Refer all servicing
to qualified service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualified service personnel under the following condi�ons:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the
opera�ng instruc�ons, adjust only those controls that are covered
by the opera�ng instruc�ons as an improper adjustment of other
controls may result in damage and will o�en require extensive work
by a qualified technician to restore the equipment to its normal
opera�on.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a dis�nct change in performance —
this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or that
have the same characteris�cs as the original part. Unauthorized
subs�tu�ons may result in fire, electric shock or other hazards.
15. Safety Check
Upon comple�on of any service or repairs to this equipment, ask the
service technician to perform safety checks to determine that the
equipment is in proper opera�ng condi�on.
16. Field Installa�on
This installa�on should be made by a qualified service person and
should conform to all local codes.
17. Correct Ba�eries
Warning: Risk of explosion if ba�ery is replaced by an incorrect type.
Replace only with the same or equivalent type.
Dispose of used ba�eries according to the instruc�ons.
The ba�ery shall not be exposed to excessive heat such as sunshine,
fire or the like.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specified so that the customer and
installer may determine a suitable maximum opera�ng environment
for the equipment.