manualshive.com logo in svg

Idis sm-u841, User Manual, Page: 25 / 44

Share
Download
Idis sm-u841 User Manual Download Page 25

 

  

 

 

 

V0.12                                                                                                   25 

 

4.2

 

Communication Command 

 

Direct command 

 
It is to send a command to the product to perform the action corresponding  
to the command. 
 
Statement form: [HEAD][SET ID][COMMAND][END] 
Ex) Power On: [K:][ALL][PON][.] → K: ALLPON. 

• [HEAD]: Represents the beginning of a statement. Put 'K:' always. 
• [SET ID]: Specifies the product that perform as the command. Put 'ALL' or  

ID number of the product. (ID range: 000 to 100) 

• [COMMAND]: It always consists of 3Bytes. 

As for command, refer to page 28. 

• [END]: Represents the end of a statement. Put a '.' always. 

 
Adjustment command 
 

It is to deliver the command which enables to adjust value in the product. 
 
Statement form: [HEAD][SET ID][COMMAND][VALUE][END] 
Ex) To adjust the volume to 50: [K:][ALL][CON][050[.]→ K: ALLCON050. 

• [HEAD]: Represents the beginning of a statement. Put 'K:' always. 
• [SET ID]: Specifies the product that perform as the command. Put 'ALL' or  

ID number of the product. (ID range: 000 to 100) 

• [COMMAND]: It is always composed with 3Bytes. 

As for command, refer to page 28. 

• [VALUE]: Adjusted value. It consists of 3Bytes ranging from 000 to 100. 
• [END]: Represents the end of a statement. Put a '.' always.

 

 
Status confirmation command 
 

It is to send commands to the product to request reply about the command state 
of the product. 
Statement form: [HEAD][SET ID][COMMAND][END] 
Ex) Make sure if the power switch is on: [K:][ALL][PWR][?] → K: ALLPWR? 

• [HEAD]: Represents the beginning of a statement. Put 'K:' always. 
• [SET ID]: Specifies the product that perform as the command. Put 'ALL' or  

ID number of the product. (ID range: 000 to 100) 

Summary of Contents for sm-u841













































Reviews:

No comments