Part 1 – Introduction
16
Rear Panel Connections
Power Cable Connection
Connect the power cable to this port. This NVR does not
feature a separate power on/off button and will turn on
the moment power is supplied.
•
Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath a rug or carpet.
•
The power cable is grounded. Do not modify the
power plug even if your power outlet does not have
a ground contact.
•
Do not connect multiple devices to a single power
outlet.
Caution – Shock hazard
Disconnect all power sources
Video Connection
●
SFP Video In Port
These ports are used to connect to higher devices that
are some distances away via optical cables. You can
connect Gigabit Fiber Media Converters (Optional:
DA-MC1101) or external hubs (Optional: DH-2112PF,
DH-2128PF, DH-2212PF) to form a network. The NVR
recognizes DirectIP™ network cameras automatically.
•
These ports operate in Full Duplex mode only.
•
When the network is connected normally, the LED
lights up. Also when data transmission over the
network is in progress, the LED flashes.
•
For more information on SFP modules supported
by the SFP Video In Port, refer to Supported SFP
Transceiver Module List on page xx.
