Part 1 – Introduction
13
Rear Panel
2
3
4
5
6
8
7
0
9
!
1
1
Factory Reset Button
2
Audio Ports
3
VGA Out Port
4
HDMI Out Port
5
Video In / PoE Ports
6
Network Port
7
Video In / Ext. Port
8
Alarm Connection Ports
9
RS232 Port
0
Power In Port (12V)
!
Power In Port (48V)
Rear Panel Connections
Monitor Connection
Connect to the
VGA OUT
or
HDMI
port.
Audio Connection
Connect the speakers with a built-in amplifier to the
AUDIO OUT
port. Use the
AUDIO OUT
port to listen
to audio from network cameras.
•
This NVR does not feature a built-in audio amplifier
unit and therefore requires the user to purchase a
speaker system with a built-in amplifier separately.
•
Check your local laws and regulations on making
audio recordings.
•
AUDIO IN(Audio input) port is not supported.
Video Connection
•
Video In/PoE Port
Connect network cameras to the NVR using RJ-45
cable (Cat5, Cat5e, or Cat6). In addition to cameras,
you can connect external hubs (Optional: DH-2112PF,
DH-2128PF) to form a network. The NVR recognizes
DirectIP™ network cameras automatically.
•
For the external hub, we recommend using an
Ext. port to enable functions such as camera
alignment.
•
Green LED on the right will turn on when PoE
comes on line. Orange LED on the left will then
flash once a link has been established.
