Part 2 - Configuration
59
●
Ignoring Interval
: The system does not produce
event log entries or issue remote notifications
regarding motion detected for the time specified
after the initial motion was detected. Set the value
between 1 sec and 5 secs or choose
Never
.
Ignoring Interval does not affect motion detection
recording.
●
Daytime Setup
: Specify when daytime starts and
ends. Adjust the time frame in 15-minute increments.
Times outside the specified range will be assumed as
nighttime by the system.
Video-Analytics_Trip Zone
●
No.
: Select which cameras to apply Trip Zone to.
●
Sensitivity
: Set daytime and nighttime sensitivity
settings between 1 (Low) and 5 (High).
●
Zone
: Define the motion detection block.
You can use the mouse to drag the zone and then select,
clear, or reverse the selection.
From the zone selection screen, right-click on the mouse
to open up the Zone Setup menu.
