5
Network Camera
Camera Installation
Inserting a SD Memory Card
1
Loosen the screws counterclockwise and remove
the cover.
2
Insert a SD memory card into the SD memory card
slot with the ‘micro SD’ print facing upward.
micro
SD
Push the SD memory card until it disengages from
the slot, and then pull it out.
micro SD Logo is a trademark of SD-3C, LLC.
3
Close the cover and tighten the screws clockwise.
Make sure that the cover is joined properly
when screwing it; otherwise, the IP67 level is not
guaranteed.
Waterproof Cable Installation
1
2
3
4
5
6
RJ45 waterproof rubber ring
RJ45 modular jack
RJ45 connector protect cover
cable waterproof rubber ring
(The waterproof rubber ring is fastened to the connector protect cover.)
RJ45 connector back cover
1
Insert a round rubber ring (silicone rubber) into
the RJ45 jack.
