manualshive.com logo in svg

Idis DC-T1232WR, Operation Manual

Share
Download
Idis DC-T1232WR Operation Manual Download Page 38

Part 1 - Remote Setup

38

System Event

Select

 System Event

 and configure system event 

settings. With system event enabled, system status will 
be checked periodically and corresponding alerts will be 
generated.

 

•

System Alive

: Select to check the system status and 

then set up a schedule.

 -

Send Email

: Select to send out an email when the 

system comes on line.

 -

Remote Callback

: Select this option to send a 

message to a remote system when the system 
comes on line and then select which system to send 
the message to.

 

•

 Alarm In Bad:

 Select to check the alarm in status and 

then set up a schedule.

 DC-T1233WHR only

 -

Send Email:

 

Select to send out an email if no 

change is detected in the alarm in status 

 -

Remote Callback:

 

Select this option to send a 

message to a remote system when the SD card is 
inserted/removed and then select which system to 
send the message to.

 

•

Email

 and 

Remote Callback

 settings under 

Event 

Action

 must be configured correctly in order to 

send out emails and messages.

 

•

Remote Callback

 is not supported on IDIS Web.

 

•

The camera must be registered to the remote 
system in order to use the 

Remote Callback

 feature.

Summary of Contents for DC-T1232WR















































Reviews:

No comments

Brands by name

Popular brands

Load more brands