Part 1 – Introduction
15
1
Remove the install screw from the camera body.
2
Screw the sun shield to the camera body by using
the M3 screws provided with the camera.
3
Assemble the outdoor bracket to the pipe by
turning the outdoor bracket.
4
Hook the safety wire of the outdoor bracket on the
safety wire ring of the camera body.
5
Connect the cable from the camera to the pipe.
6
Use the provided M5 screws to screw the sun shield
to the outdoor bracket.
7
Connect external devices, the network cable, and
the power adapter.
8
Supply the power.
Flushed
The camera is mounted in the housing.
1
Remove the ceiling tile from the ceiling. Draw circle
whose diameter is 7.87" (200 mm on the tile. Cut the
circle out of the ceiling tile.
2
Connect external devices, the network cable, and
the power adapter.
The ceiling tile cannot be thicker than 1.3” (35mm).
3
Turn the housing dome cover counterclockwise to
remove the housing dome cover from the housing
can.
4
Insert the housing into the ceiling and turn the
screws of three clamps clockwise. The clamps are
laid over the ceiling tile and the housing is held in
the ceiling.
5
Connect the housing dome cover to the housing can
and turn it clockwise to secure the dome cover to
the housing.
6
Supply the power.
The ceiling tile cannot be thicker than 1.3” (35mm).
