Part 1 – Introduction
9
Overview
Product color and design may vary depending on the model.
Illustrated Parts List
Body
2 3
1
4
Dome Cover
3
1
Lens
2
Wall/Ceiling Installation Hole
3
Dome Cover Screw Hole
4
Factory Reset Button
Cable
3
2
1
1
Ferrite Core
2
Network Port
3
Video Out
●
Lens
Fixed lens is installed.
●
Wall/Ceiling Installation Hole
Used to screw the camera in place on a wall or a
ceiling.
●
Dome Cover Screw Hole
Secures the dome cover to the camera.
●
Factory Reset Button
Restores the camera's default factory settings. For
more information, refer to the Factory Reset.
●
Cable
- Ferrite Core: It is provided for EMI (electromagnetic
interference) suppression.
- Network Port: Connect a network cable with
an RJ-45 connector to this port. The camera is
supplied with power over Ethernet cable by using
a PoE switch. For more information on PoE switch
use, refer to the switch manufacturer's operation
manual. You can configure, manage, and upgrade
this camera and monitor its images from a remote
computer over the network. For more information
on network connection setup, refer to the IDIS
Discovery operation manual.
- Video Out (BNC): Connect the monitor. Use these
ports for previewing video and not monitoring
video.
