Part 1 - Remote Setup
41
•
System Alive
: Select to check the system status and
then set up a schedule.
-
Send Email
: Select to send out an email when the
system comes on line.
-
Remote Callback
: Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
•
Alarm In Bad
: Select to check the alarm in status and
then set up a schedule.
DC-B1103 / DC-B1203 / DC-
B1303 only
-
Send Email
: Select to send out an email if no
change is detected in the alarm in status.
-
Remote Callback
: Select this option to send
a message to a remote system if no change is
detected in the alarm in status and then select
which system to send the message to.
•
Disk In/Out
: Select to check if the SD card has been
inserted/removed.
DC-B1103 / DC-B1203 / DC-B1303
only
-
Send Email
: Select to send out an email when the
SD card is inserted/removed.
-
Remote Callback
: Select this option to send a
message to a remote system when the SD card is
inserted/removed and then select which system to
send the message to.
•
and
Remote Callback
settings under
Event
Action
must be configured correctly in order to
send out emails and messages.
•
Remote Callback
is not supported on IDIS Web.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
