![background image](http://html1.mh-extra.com/html/idirect/evolution-x3/evolution-x3_installation-manual_3713018008.webp)
4.
Acquiring the satellite signal
If you are aligning the dish yourself, you will need to do the following:
a)
Calculate your estimated dish pointing angles:
Visit
http://www.satsig.net/ssazelm.htm
Input the
satellite orbit
: W6=21; W3A=7; AM22=53; W2A=10
Input your
latitude
and
longitude
and click calculate
This will return
azimuth
(magnetic) which is the left and right movement
of the dish;
elevation
, the up and down movement of the dish; and the
polarisation
, which is the rotation angle of the feed assembly.
Use these value to point the dish is the right direction
b)
We recommend using a
Satellite Meter
such as a MaxPeak or Horizon to
then find the satellite signal
c)
Once you have a lock on the signal, open up the “antenna pointing tool”
in iSite by right clicking on the remote and selecting “Align Antenna” >
“Antenna Pointing”
Click on the “Antenna Pointing” tab at the top then click “Start”
Summary of Contents for Evolution X3
Page 6: ......