6.
Activating the modem
a)
You will need to check if transmit is
enabled
.
Open a command prompt and type “
telnet
” space, then the modems IP
address
The username will be
admin
and password will be either
bentleys2
(W3A/W6 S2),
eutelsat2008
(AM22),
eutelsat
(SeSat2/W6 S1) or
london12
(W3A S1)
Once logged in, type the command:
tx iflDC
(note that “DC” must be
uppercase)
If this is set to
off
, retype the command:
tx iflDC on
b)
If everything is setup correctly, the
RX
and
Power light
on the front of the
modem will be
solid green
c)
You will then need to contact Technical Support to request activation
Should you encounter any difficulties setting up your modem, please
contact WAFA technical support:
+971-2-6334216
or raise a support ticket if you have the facility to do so.
Summary of Contents for Evolution X3
Page 6: ......
