![background image](http://html.mh-extra.com/html/idirect/evolution-x1/evolution-x1_installation-support-and-maintenance-manual_617971050.webp)
36
Installation, Support, and Maintenance Guide
Evolution
X1 Satellite Router
Installation with AC (Option 1) or DC (Options 2 and 3) Power Supplies
•
One (1) LAN Ethernet gland, see
•
One (1) DC 6 foot power cable, see
, item labeled D
•
Additional components normally required are:
•
One antenna
•
IFL (Inter Facility Link) or Coaxial cable appropriate for the installation
•
One appropriate feed assembly for the antenna (OMT)
•
One BUC (Block Up Converter)
•
One LNB (Low Noise Block Converter)
Figure
6-1. Packaged Items
6.4 Installation with AC (Option 1) or DC (Options 2
and 3) Power Supplies
This section describes installation with either an AC power Supply (Option 1) or a DC Power
supply (Option 2 or 3).
6.4.1
Installation with AC Power Supply to the Power Module -
Option 1 (AC)
For an X1 Outdoor Router with an AC power supply:
1.
Assemble the AC power gland, as described in
, using the AC Pin assignments in
.
2.
Connect the AC power gland assembly to the Power Supply Connector on the Power
Module, labeled
100-240 VAC, 1.2 A 50/60 Hz
Module connector descriptions.
Summary of Contents for Evolution X1
Page 4: ...iv Installation Support and Maintenance Guide Evolution X1 Satellite Router Revision History ...
Page 89: ......
Page 90: ......