Installation Guide ilex
L280-0974 REV C
Page 9
Typical cropped sizes for a 1920 x 1080 starting aspect ratio, which is what the DAUs are set to output. This should be a
starting point and can be adjusted as required for each window/channel
1920
1080
X1
Y1
X2
Y2
Aspect
multiplier
240
0
1680
1080
4:3
1.33
0
0
1920
1080
16:9
1.777778
420
0
1500
1080
Square
1
285
0
1635
1080
1280x1024
1.25
DisplayPort inputs are directly connected to the back of the MSV2 and should output the exact aspect ratio of
the video source.
5.6.
Click apply and note changes on the video screen. Adjust values as required.
5.7.
Repeat for each channel CH2, CH3, & CH4
5.8.
Verify keep aspect ratio is turned on for each channel as well
Rename Layouts and Channels
6.
Renaming will occur in the Preset & Channel tab
6.1.
Click on the preset & Channel tab
6.2.
In the top click on the drop-down
menu and navigate to the
desired preset & channel.
6.3.
Click in the Preset Name textbox
6.4.
Type in the desired name.
6.5.
Note: Use only letters and
numbers, symbols are not
allowed and will create errors
in the programming
6.6.
Click apply
6.7.
Rename each of the layouts as required, remember to click apply after renaming each of the layouts.
6.8.
Channels can also be renamed in the same fashion.
6.9.
Repeat steps 6.2 through 6.7, except select the desired channel in step 6.2
Saving and returning to guest mode
7.
Go to the design tab
7.1.
Hit the save button
7.2.
Click on the sign out button at the top right of the page
7.3.
Sign back into software using the following (case sensitive on both username and password)
7.3.1.
Username:
idi
7.3.2.
Password:
Password55
