Operator Manual
Aspect 100-4
L100-3316 Rev. A
16
Lifting the lip under the mushroom shaped Panhandle releases
the brakes that stop all lateral and longitudinal motion of the
tabletop. Holding the ring up with fingertips allows the
tabletop to be manually repositioned.
The Tabletop Motion Control Unit clamps onto either the left
or right Accessory Rail on the tabletop and can be moved along
the length of the rails by rotating the lever down on the bottom
of the Motion Control Unit until the clamp releases tension on
the Accessory Rail. Then the Unit can be slid along the rail or
removed.
9.
STANDARD ACCESSORIES
Please reference website for most up to date list of
available accessories for purchase. No IDI Accessories
nor components of accessories listed below contain latex.
9.1.
Patient Mattress Pad for Tabletop.
The Patient Mattress Pad is held in place by hook and loop fasteners. To remove the pad, simply
pull pad up gently to remove. Replacement pads are supplied with new self-adhesive fasteners
installed and new adhesive backed mating pieces for the tabletop. Peel off old fasteners from
Tabletop. Peel off the protective paper and carefully put new pad into position. Apply pressure to
complete installation.
Note: Pad complies with California Technical Bulletin 117.
