Idexx VetTest, Operator'S Manual

Page: 38 / 132

%o
IDEXX VetTest* Chemistry Analyzer Operator’s Manual
Postanalysis Steps
5IF7FU5FTUBOBMZ[FSBVUPNBUJDBMMZFKFDUTVTFETMJEFTJOUPUIFVTFETMJEFESBXFS
When sample analysis is complete:
&NQUZUIFVTFETMJEFESBXFS 1.
Remove the pipettor. Then pull off and discard the pipette tip. 2.
Replace the pipettor in its holder. 3.
Check the paper supply.
When you are ready to continue, follow the onscreen instructions.
Important:
*%&99SFDPNNFOETUIBUZPVFNQUZUIFVTFETMJEFESBXFSBGUFSFWFSZ
analysis. A full slide drawer can jam the rotor. Also, if the drawer is empty at the start of
slide insertion, any ejected unused slides will be easily identified and can be reloaded.
Results
Internal VetTest printer results
Results from the internal VetTest printer are shown here:
Software version
Analyzer serial number
Date/Time
Species
Required ID
S/N 06824 Ver X.X
16-Aug-2007 02:14PM
Adult Canine
Mitzy
Bob
Jones
1
ALB = 3.19 g/dl
(2.70-3.80)
ALKP = 159 U/L
(23-212)
ALT = 58 U/L
(10-100)
AMYL = 159 U/L LO
(500-1500)
Ca = 8.29 mg/dl LO*
(7.90-12.00)
CHOL = 159.7 mg/dl
(110.0-320.0)
CREA = 1.41 mg/dl
(0.50-1.80)
GLU = 86.8 mg/dl
(77.0-125.0)
PHOS = 3.35 mg/dl
(2.50-6.80)
TBIL = 1.64 mg/dl HI***
(0.00-0.90)
TP = 4.99 g/dl LO*
(5.20-8.20)
BUN = 22.2 mg/dl
(7.0-27.0)
GLOB = 1.80 g/dl LO
(2.50-4.50)
Patient ID
Client first name
Client last name
Selected test chemistry
Result from this sample
Reference range
Relationship between results from this
sample and the reference range
Star system indicator
Above reference range: HI
Below reference range: LO
Calculated by subtracting ALB from TP
Note: The reference ranges displayed in the report are for the named species
(i.e., Canine, Feline).