41
3.2.
Reset Gearbox Oil Life
Perform the following to reset the gearbox oil life remaining counter when the gearbox oil is
changed per the schedule listed in Table 4.
A.
On SAM Control Center/SAM Pump Controller, access password screen.
B.
Sequentially, touch digits of actionable password to reset gearbox oil life 1.
See Table 3 (page 36).
C.
Verify GEARBOX OIL LIFE REMAINING resets to 200 hours. (See Figure 30.)
D.
If applicable, sequentially touch digits of actionable password to reset gearbox oil
life 2. See Table 3 (page 36).
E.
Verify GEARBOX OIL LIFE REMAINING resets to 200 hours. (See Figure 31.)
See Figure 30 for typical single gearbox pump models or Figure 31 for pumps with a second (aux-
iliary) gearbox.
Figure 30. SAM Pump Controller Pump Info Screen (Single Gearbox)
Figure 31. SAM Pump Controller Pump Info Screen (Dual Gearboxes)
Summary of Contents for Hale Sam
