Idex Hale Sam, Technical Manual

Page: 196 / 223

176
Figure 143. Calibrate Valve Stops Screen–Green Bus
4.5
Figure 144. Calibrate Valve Stops Screen–Selected And Active
E. When selected valve(s) indicate Calibrated, perform one of following:
Touch Red dot next to another valve, and repeat steps above to calibrate another valve.
Or, return to CALIBRATION MENU screen (touch Calibration tab) to select opposite bus.
Or, if calibrations are complete, go to Step F.
F. Touch Home button.
G. Cycle SAM system power.