Idex Hale Sam, Technical Manual

Page: 171 / 223

151
4.15.7 Testing SAM Speaks (Audio Alerts)
The TEST AUDIO page is (or pages are- there are two) used to verify the audio portion of SAM is
functioning correctly, when activated the alarms, warnings and spoken audio files will broadcast
through the speakers. This page is useful after replacing an audio system component.
This page is also useful to check audio volume adjustment. If you want to ensure the volume
level set is sufficiently loud, you can use this screen to force any listed audio file to play.
4.15.7.1
Test Audio Page
The SAM Pump Controller is the source of SAM audio and can be used to test the audio output
and components. Display the SAM Pump Controller Enter Password screen (see paragraph
2.6.1.2, page 35) and then enter the Audio Test Page password (see Table 3, page 36). Use the
files listed to test the output of the audio system.
By alternating back and forth between the Audio Test Page and Volume password the audio vol-
ume can be set and then verified.
After the audio test pages (Figure 130 and/or Figure 131) display, touch any SAM Speaks file
name listed to activate the alert.
Figure 130. SAM Speaks Verbal Alerts (Page 1)
Figure 131. SAM Speaks Verbal Alerts (Page 2)