Idex Godiva GV10000 Installation Manual Download Page 20

 

 

 

 

 

20 

 

©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the right 

to amend specifications without notice or obligation. 

 

SPARE PARTS LIST  

 

TO ORDER SPARE PARTS:  

ALWAYS QUOTE:  

1. 

The pump serial number as identified on the unit. The serial number is stamped 

on the volute casing, near the delivery flange. 

2. 

The item number, part number and the description, as given in the parts list 

below. 

 

The company cannot accept responsibility for parts not ordered in accordance with 

these instructions.  

 

GENERAL:  

 

1. 

PAYMENT: 

In the absence of an approved account, goods will be invoiced “Pro Forma” or sent 

C.O.D. Delivery is ex-works, carriage and packing being extra. 

 

2. 

DAMAGE: 

The company does not hold itself responsible for goods lost or damaged in transit. All 

packages should be signed for on receipt as “unexamined”. In the event of loss or 

damage, a claim should be made on the carrier without delay. 

 

3. 

PARTS CLAIMED TO BE DEFECTIVE AND REPLACEABLE UNDER 

GUARANTEE. 

Such parts must be returned to the works, carriage paid, for examination. 

THE DATE OF DELIVERY AND SERIAL NUMBERS MUST ALWAYS BE GIVEN. The 

cost of carriage and of any work entailed in refitting replacement parts is chargeable to 

the claimant. 

 

4. 

PATTERNS 

If there is any doubt, send the old parts as patterns. Such patterns must be CLEARLY 

LABELLED, INDICATING THE SENDER’S NAME AND ADDRESS. 

If the patterns are to be returned, they must be marked accordingly, otherwise they will 

be scrapped. 

 

5. 

WARNING. 

It is of the greatest importance that only genuine spare parts supplied by GODIVA LTD. 

are used, otherwise the guarantee will be null and void. 

 

6. 

All sales are made subject to the Company' s Standard Conditions of Sale in 

force at the time of the sale. 

 

 

 

 

 

Summary of Contents for Godiva GV10000






































Reviews: